SolidWorks 2007 SP5.0

[tbeck11]

Any word on SP5.0? I thought I heard it was coming out the first week of October.

 

[JMirisola]

The EV is out, and has been for a couple of weeks, so the full release can't be too far behind.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[NL8]

General rule of thumb is two weeks after the release of the EV, but since they pulled the EV from download I'm guessing they found a serious glitch.

 

[JMirisola]

EV5.0 was pulled for the following two reasons:

SPR 398764 Components in non-active configuration get suppressed after saving
SPR 398935 Dragging a dimension handle changes the dimension from 'This Configuration' to 'All Configurations'

Both are being addressed and will be fixed in the production release.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[ctopher]

I just noticed something this week. For those of you that have SP4.0, if you go to Help/About SolidWorks, does it show 4.0 or 0.0? Mine shows 0.0. Weird.

Chris
SolidWorks 07 4.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 10-07-07)
ctopher's blog

 

[handleman]

Mine says:

Solidworks(R) 2007

SP4.0

Serial No.: 0000 1247 6524 8436 JUST KDNG

 

[J-C]

Nice serial number handleman.

Jason

SolidWorks 2007 SP4.0 on WinXP SP2
SolidWorks 2008 SP0.0 on WinXP SP2

 

[EEnd]

ctopher,

The version displayed in the Help / About SolidWorks is determined by the help files which were a separate download last time I upgraded.

Eric

 

[PDMAdmin]

To my knowledge, the help files are always a separate download. As I recall, the SP number isn't always updated in the help files.

 

[ctopher]

I updated the Help file. I did the whole reinstall including Help, it still shows SP0.0.
I will call my VAR later today.
It's not that important anyway, I'm going to update to 2008 soon.

Chris
SolidWorks 07 4.0/PDMWorks 07
AutoCAD 06
ctopher's home (updated 10-07-07)
ctopher's blog