-
6
- #1
SBaugh
Mechanical
- Mar 6, 2001
- 6,686
Thanks to everyone that filled out my poll. There was a lot interest in knowing this information. I will be posting this on my website eventually since I do not have a decent blog (and the fact I don't have time to blog), but until then I have attached the Spreadsheet to this thread post.
Read through it, let me know if you find anything wrong or have any questions. Outside of what I mention on tab 1 and 2 of the spreadsheet every thing else should be correct.
Regards,
Scott
Scott Baugh, CSWP![[pc2] [pc2] [pc2]](/data/assets/smilies/pc2.gif)
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader
Read through it, let me know if you find anything wrong or have any questions. Outside of what I mention on tab 1 and 2 of the spreadsheet every thing else should be correct.
Regards,
Scott
Scott Baugh, CSWP
![[pc2] [pc2] [pc2]](/data/assets/smilies/pc2.gif)
Berry Plastics
Cad Admin\Design Engineer
GEASWUG Greater Evansville Area SWUG Leader
faq731-376"If it's not broke, Don't fix it!"