Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solidworks Assembly Design Table link to Part Custom Properties

Status
Not open for further replies.

dexterdweller

Petroleum
May 21, 2011
3
US
Using Solidworks I’m creating a top down assembly besides the dimensions of the parts being pulled into the BOM through the custom properties I need to be able to change material grades etc... I have pull down boxes in the Assembly design table that will allow you to change thickness and material grade that are linked to a table via match and lookup it will retrieve the corresponding part number. I need to know if possible how to link these either to a design table inside the parts or can I use syntax to drive them from the assembly design table.

Thanks in advance,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top