Nov 7, 2004 #1 iqpuppie Industrial Nov 7, 2004 1 Solidworks Demo for Industrial Design, Surfacing a Computer Mouse: http://www.productdesignforums.com/index.php?showtopic=230&st=0
Solidworks Demo for Industrial Design, Surfacing a Computer Mouse: http://www.productdesignforums.com/index.php?showtopic=230&st=0
Nov 7, 2004 #2 SBaugh Mechanical Mar 6, 2001 6,686 Post it again when it's actually finished. If it's you making this, then you should post on a different site or a tips & tricks site for easier reading. Such as this: http://www.scottjbaugh.com/Tips_Tricks/Tooling_Split_With_Images.htm Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376 Upvote 0 Downvote
Post it again when it's actually finished. If it's you making this, then you should post on a different site or a tips & tricks site for easier reading. Such as this: http://www.scottjbaugh.com/Tips_Tricks/Tooling_Split_With_Images.htm Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com faq731-376
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")
