Solidworks Hardware Help

[fish1856]

I'm currently hitting a bottle neck. I'm trying to save a rather large file, and the save times are getting ridiculously long, I believe the one I had last night was around 2hrs 30 minutes. Unfortunately, when I save, my processor pegs and I can't utilize my computer. What is going on? The computer I'm running is:
MicronPC
1.6ghz P4
1 gig ram
64 meg, nVidia Quadro NVS PCI


Any help on this would be appreicated.

 

[SBaugh]

You video card is you biggest bottle neck because that card is not supported by SW. A 1.6 Ghz is to small to run a large assembly on.

faq559-986
faq559-936
faq559-974
faq559-1066
faq559-1094

Just look in the FAQ's that is what they are there for.

Regards,


Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users