Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solidworks World 2012 3

Status
Not open for further replies.
macduff

macduff

Mechanical
Dec 7, 2003
1,255
For the first time in my life, a company is letting me go to Solidworks World. I almost fainted when they said I could go.

So...who's all going?

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Replies continue below

Recommended for you

Sort by date Sort by votes
A No Go for me... again. Sheesh, you figure after 13yrs and 4 different employers I'd find one that would let me attend. My best bet is to wait for it to roll through Orlando again.

"Art without engineering is dreaming; Engineering without art is calculating."


Have you read faq731-376 to make the best use of these Forums?
 
Upvote 0 Downvote
Yeah, close by huh? That's why I'm going, Tucson is very close to San Diego.

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Upvote 0 Downvote
Again for me, can't go.
Two years ago being in Anaheim I couldn't go, boss said no (I'm just a few miles from there). Ugh!
Although I did get to meet some of the guys and the free exhibits thanks to Matt (fsuper).

Chris
SolidWorks 11
ctopher's home
SolidWorks Legion
 
Upvote 0 Downvote
Awesome Anna! Will you be presenting?

See ya there!

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Upvote 0 Downvote
You must have been the "student" in your EXAM thread on SB's page.

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Upvote 0 Downvote
I won't be there this year, but for a great reason: I got custody of my sons. [thumbsup]

Jeff Mirisola, CSWP
Director of Engineering
M9 Defense
My Blog
 
Upvote 0 Downvote
Congrats Jeff!

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Upvote 0 Downvote
I'll even give ya a star for that! Maybe our other fellow eng-tips associates will do the same?

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2010 SP 5.0
Dell T5500 Windows 7 Pro (64-bit)
Xeon CPU 2.53 GHz 6.00 GB of RAM
nVida Quadro 4000 2 GB
3D Connexion-SpaceExplorer
 
Upvote 0 Downvote
Thanks, Macduff, I couldn't be happier.

Jeff Mirisola, CSWP
Director of Engineering
M9 Defense
My Blog
 
Upvote 0 Downvote
Congradulations to Chris (macduff) for being able to make it
and to Jeff Mirsola for getting the kids.

I Won't be going either this year [sad] but had a good time at the 2008 SWW which was in San Diego and 2010 in Anaheim. Hope all of you who have a chance to go this year have a great time and learn new techniques.

I got to meet Chris ctopher at the meet/tweet up in 2008. It's one thing to swap posts online but it's nice to see the people who post all the great tips from this and and other forums in person.

Usually ost of the material from the SolidWorks World presentations Videos and Powerpoints get posted online sometime later in the year. I saw a lot of last years presentations this way because I was unable to go.

[jester]
"It's not the size of the Forum that matters, It's the Quality of the Posts"
Michael Cole
Boston, MA
CSWP, CSWI, CSWTS
 
Upvote 0 Downvote
Yeah Chris it was at the House of Blues in 2010 that I met you, my mistake.

Should have remembered cause you live in Anaheim.

Hopefully you can convince your boss to let you go next time it's nearby. I'm sure you'll be able to get at least a touch of the experience again this year.

Michael
 
Upvote 0 Downvote
No go this year. We are starting a new major project, he won't let me go. Unless something changes last minute.
I don't know where it will be next year.

Chris
SolidWorks 11
ctopher's home
SolidWorks Legion
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

drawoh
  • Locked
  • Question
SolidWorks Flexible Parts
2
Replies
20
Views
1K
SBaugh
SBaugh
CAD2015
  • Locked
  • Question
SolidWorks Feature Recognition 2
Replies
8
Views
820
ctopher
ctopher
CAD2015
  • Locked
  • Question
SOLIDWORKS Visualize Professional 1
Replies
4
Views
694
CAD2015
CAD2015
Jawed62
  • Locked
  • Question
Solidworks VBA with custom property 1
Replies
2
Views
856
Jawed62
Jawed62
RobWard
  • Locked
  • Question
Solidworks 2024 minimising on opening files
Replies
2
Views
398
RobWard
RobWard

Part and Inventory Search

Sponsor

Back
Top Bottom