SOS pipe!!

[pipelinevzla]

Someone recommends the use of PIPE LONGITUDINAL SEAM to the following conditions:

Design Pressure: 1500 psi
Gas volume: 1500 MMPCND
H2S: 12 ppm
CO2: 7-8% molar
H2O: 5 lb / MMPCND
Material pipe: API 5L X70

reggards

 

[zdas04]

OK, was there a question there?

David

 

[pipelinevzla]

with the conditions mentioned above, there is someone to recommend the use of pipes with longitudinal seams?

 

[stanweld]

Welded API 5LX-70 is most often specified for similar service conditions.

 

[SJones]

I would recommend it provided that you have a suitable specification and go to a suitable pipe mill!

Steve Jones
Materials & Corrosion Engineer

http://www.linkedin.com/pub/8/83b/b04