Source of supply - Hydraulic hoses

[TMD]

I'm looking for a supplier of hydraulic hose assemblies that are a bit unusual:
- working pressure 5500 psi, burst pressure 4x
- 3/4" nominal
- nominal o.d. 28 mm [1.10"]
- 80 C working ambient
- 13 m (42 ft) (can be spliced, and exceed the nominal od)
- PTFE core
- 316 SS braid reinforced
The combination of high temperature and high pressure seems to be a bit of a problem. Google turns up lots of suppliers, but when given the details, I get a lot of "no quote".

Any ideas?

 

[MikeHalloran]

If you could allow 1-1/4" OD, you might get a quote.



Mike Halloran
Pembroke Pines, FL, USA

 

[unclesyd]

I would contact either of the companies below for your requirements.

http://ushosecorp.com/images_products/files/2006_Jackson_Catalog.pdf

http://www.flexonics.ca/index.php/p...ries_uhp_ultra_high_pressure_smooth_bore_hose

 

[cbiemers]

We had an application a few months back that had a similar requirement - a customer wanted to pump high pressure steam at a large volume into a test chamber. It took weeks to find a suitable hose.

two suppliers that helped us were Universal Metal Hose<br />
<a href='

http://www.universalmetalhose.com'>Universal

Metal Hose</a><br /><br />
and HFI Fluid Power Products
<br />
<a href='

http://www.hfifluidpowerproducts.com'>Hydraulic

Hose and Hose Assemblies</a>
<br /><br />
Good luck, if they cant help you out, you may have to try a steel tube solution.