Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Specifying Abaqus GPU card

Status
Not open for further replies.
bigmanrunning

bigmanrunning

Mechanical
Joined
Mar 22, 2011
Messages
10
Location
US
Hi Guys,

I have a computer with both the Quadro 4000 and the Tesla K20 gpu. Abaqus defaults to using the Quadro card when I specify to use a GPU in a simulation, but I would like to use the Tesla card. I have looked in the graphicsConfig.env file but could not figure out what to change, and I was not able to find any useful information online other than that people have used the Tesla compute cards.

Any help would be appreciated.

Dan.
 
Status
Not open for further replies.

Similar threads

swahlgren
  • Locked
  • Question Question
Abaqus 2025 installation files
Replies
2
Views
2K
FEA way
FEA way
N
  • Locked
  • Question Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
4K
dmapguru
dmapguru
Kamyar_K
  • Locked
  • Question Question
Slip in the rigid railroad track - ABAQUS model
Replies
3
Views
885
Kamyar_K
Kamyar_K
AACING
  • Locked
  • Question Question
Methods to add rotation dof to solid with ABAQUS, MSC NASTRAN and SAMCEF
Replies
3
Views
2K
GVDR
G
hwa0725
  • Locked
  • Question Question
ABAQUS: Model not converging after turning on NLGEOM (Even with very small steps)
Replies
10
Views
2K
IceBreakerSours
IceBreakerSours

Part and Inventory Search

Sponsor

Back
Top