GD2
Mechanical
- Sep 25, 2017
- 685
Folks,
A customer specified a 64 in SS 304 pipe spiral welded. The manufacturer manufactured the pipe with midsection longitudinal seam welded and two end sections with circumferential welds.
Should the customer accept or reject the pipe?
In terms of spiral weld pipes, what is the usual RT type, extent and joint efficiency considered?
GDD
Canada
A customer specified a 64 in SS 304 pipe spiral welded. The manufacturer manufactured the pipe with midsection longitudinal seam welded and two end sections with circumferential welds.
Should the customer accept or reject the pipe?
In terms of spiral weld pipes, what is the usual RT type, extent and joint efficiency considered?
GDD
Canada