Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Spiral Wrap 1
- Thread starter bpc2008
- Start date
-
1
- #2
Hello,
You can do it with a helical protrusion. If you are planning to have it follow a curved wire path, it can become more complex and consume more resources. For a straight path, model it so you can create a rectangle that represents the cross section of the wrap, and then use a steep enough pitch to create the sprial.
Kyle
You can do it with a helical protrusion. If you are planning to have it follow a curved wire path, it can become more complex and consume more resources. For a straight path, model it so you can create a rectangle that represents the cross section of the wrap, and then use a steep enough pitch to create the sprial.
Kyle
- Status
Similar threads
- Locked
- Question