Splines in drawings 1

[reilly22]

Why are the splines that i draw in drawings coming out as jagged lines when i print? They look fine in my drawing view, during print and print preview they are jagged and look horrible. Thanks for any help on this.

 

[JMirisola]

Check your printer settings...

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

 

[reilly22]

All printer settings are set on high quality. I've gone through them all. I've played with it some more and it turns out that when i draw the spline in the part view it comes out jagged, when i draw it in the main drawing view it turns out fine. I would prefer to draw the spline in the part view so that it moves with the part.

 

[Theophilus]

What happens if you draw the spline in a sketch within the part? Then show the spline sketch. It will move with the part view in the drawing file.



Jeff Mowry

http://www.industrialdesignhaus.com

Reason trumps all. And awe transcends reason.