Jun 22, 2011 #1 morienr Mechanical Jul 24, 2010 11 Does anyone know if split faces can be used for cyclic symmetry simulations? Thanks, Rob
Oct 15, 2011 #2 kellnerp Mechanical Feb 11, 2005 1,141 SW cannot handle this. Cyclic symmetry requires imposing coupled degrees of freedom on cyclic symmetric faces and even geostar can't do this. TOP CSWP, BSSE http://www.engtran.com http://www.niswug.orghttp://www.linkedin.com/in/engineeringtransportPhenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3 "Node news is good news." Upvote 0 Downvote
SW cannot handle this. Cyclic symmetry requires imposing coupled degrees of freedom on cyclic symmetric faces and even geostar can't do this. TOP CSWP, BSSE http://www.engtran.com http://www.niswug.orghttp://www.linkedin.com/in/engineeringtransportPhenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3 "Node news is good news."
