Dec 13, 2018 #1 izax1 Mechanical Jul 10, 2001 291 0 16 NO Hi everybody. Is there a good method of adding the static g-forces to a vertical frequency dependent SRS analysis?
Hi everybody. Is there a good method of adding the static g-forces to a vertical frequency dependent SRS analysis?
Dec 28, 2018 #2 JGard1985 Structural Nov 5, 2015 189 0 0 US I just combine deadweight (static loads) and seismic loads per the code. Depending upon code equations. Usually for frequency dependent I use 1.5 times peak spectral acceleration to come up with loads (to account for multimode effects) Jeff Pipe Stress Analysis Finite Element Analysis http://www.xceed-eng.com Upvote 0 Downvote
I just combine deadweight (static loads) and seismic loads per the code. Depending upon code equations. Usually for frequency dependent I use 1.5 times peak spectral acceleration to come up with loads (to account for multimode effects) Jeff Pipe Stress Analysis Finite Element Analysis http://www.xceed-eng.com
Dec 28, 2018 Thread starter #3 izax1 Mechanical Jul 10, 2001 291 0 16 NO Thank you, Jeff. That's what I thought was the best method. Upvote 0 Downvote