Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
ss316 compliance to nace mr 0175
- Thread starter Masoud280
- Start date
- Status
Hi Massoud. It may not be as simple as that. Cold working the material (forming, rolling, bending, drawing, etc.) will change the hardness of the metal. Manufactured 316SS may have to be annealed in order to releive residual stresses from cold working the material.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question