stainless steel sandblasting

[martawelding]

Dear collegues,i have a question regrding sandblasting of stainless steel AISI 304:
Do someone have experience of SANDblasting stainless steel (with sand,not with pearls).Afterwards it needed to be painted with epoxy coating.
The use is in marine industry for waste water.
Please give me any tips form you experience.

Thanks

marta

 

[SJones]

A non-metallic mineral abrasive is normally applied, typically fused aluminium oxide or almandite garnet.

Steve Jones
Materials & Corrosion Engineer

http://www.linkedin.com/pub/8/83b/b04

 

[21121956]

Hello everybody:

Marta, take a look to this document

http://www.euro-inox.org/pdf/build/Finishes02_EN.pdf.

I am not sure but, for your spanish name, I think that would be possible that you read that document in spanish language. If so, this is the link

http://www.euro-inox.org/pdf/build/Finishes02_SP.pdf.

El que no puede andar, se sienta.

 

[BigInch]

Macedonian Spanish must surely be quite different.

Only put off until tomorrow what you are willing to die having left undone. - Pablo Picasso