Standard Fasteners Update 1

[ewh]

Just a heads up to let everyone know that John Baker has updated his fastener files, both english and metric, and they are on the PLM World download site. They are an excellent time saver for creating standard fasteners.
For those who are not PLM World citizens, they are also available in the GTAC scratch are.
Thanks John!

 

[Darthdad]

Hi ewh

I have obtained a webkey account and gone to the scratch area at gtac. I attempted to download the file 'fasteners_metric.zip' but it could not find it.
Do you know if I am using the correct name.
Kind Regards

 

[Vikingbro]

Darthdad,

I think that you did the procedure correctly, however, the files reside in the scratch area for a limited time. John Baker would have more of an idea as to how long they were actually there.

I hope this helps!


Chris Cooper
Senior CAD Specialist
Cleveland Golf / Never Compromise

http://www.clevelandgolf.com

http://www.nevercompromise.com

 

[ewh]

Try signing up at PLM world and downloading from there.

 

[JohnRBaker]

Files are purged from the GTAC "scratch" area after about 72 hours. If it's not convenient for someone to get thes libraries from the PLM World download site, I'll gladly re-upload them to the scratch area.

John R. Baker, P.E.
Product "Evangelist"
NX Product Line
UGS Corp
Cypress, CA
Phone: 714-952-6032
FAX: 714-952-5758
John.R.Baker@ugs.com

 

[Darthdad]

Hi John

Thanks for the feedback. I have been busy hence the late response. I am having difficulty joining the PLM site, could
you please upload the file to the GTAC "scratch" area again.

Regards

 

[JohnRBaker]

I've just uploaded the 2 zip files named:

"fasteners_english.zip"
"fasteners_metric.zip"

They should be available for the next 2 or 3 days.

John R. Baker, P.E.
Product "Evangelist"
NX Product Line
UGS Corp
Cypress, CA
Phone: 714-952-6032
FAX: 714-952-5758
John.R.Baker@ugs.com

 

[Darthdad]

Thank you John.
I have dowloaded the files. They will be of great value.