Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

standard for the control building ?

Status
Not open for further replies.

emrekop

Industrial
Dec 10, 2006
11
which ASME code is applicable for the Control building inside piping i.e. piping of HVAC sysstem...?thanks
 
Replies continue below

Recommended for you

Review some old ISA standards in the RP 60 series RP 60.1, 60.3, 60.8, 60.9 etc.

Several NFPA standards apply such as 70, 70E, 72, 780, especially 90 A & B on HVAC, 91 on exhaust systems, 101, 220 on the construction, 251, 255, 496 on pressurization, etc.

The applicable building code.

Also look at some of the threads related to blast resistant construction and recent posts regarding the trailers located too near the process at a recent plant explosion, etc.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor