Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Standard Raymond Piles with Butt Diameter of 7.5 feet

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
I have an existing foundation for an old building in Los Angeles. The foundation consists of a Standard Raymond Concrete Piles with a Butt Diameter of 7.5 feet. They were installed in 1927. I am trying to find out their dimensions. Is anyone familiar with these piles? How does a standard Raymond concrete pile differ from a Raymond taper pile or step-taper pile?
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
The minimum number of piles required for static load test
Replies
6
Views
10K
wangqian
W
Sparky4598
  • Locked
  • Question Question
How does torque tell load capacity of helical piles
Replies
3
Views
5K
dik
dik
Boiler106
  • Question Question
Augercast Pile Minimum Diameter for stability
Replies
4
Views
3K
ANE91
ANE91
M
  • Locked
  • Question Question
Driving Piles Through 900mm Rock Revetment
Replies
6
Views
4K
EireChch
EireChch
LeuBong
  • Locked
  • Question Question
Piles of bridge built in 1972 in Vietnam follow american standard
Replies
3
Views
536
FacEngrPE
FacEngrPE

Part and Inventory Search

Sponsor

Back
Top