Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Starter Gear Pitch

Status
Not open for further replies.

fl9018

Mechanical
Mar 18, 2016
5
Just out of curiosity, does anyone know the gear pitch and pressure angle of a late model Ford starter?
 
Replies continue below

Recommended for you

The starter pinion and mating ring gear used on most engines have a huge difference in tooth counts. In order to get them to mesh satisfactorily it requires a significant amount of geometry modification. The starter pinions typically have around 9-10 teeth, and the pressure angle used is low (14.5 deg or less).

Here's an example from Tilton:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor