Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

STAT! Dialog Boxes

Status
Not open for further replies.

matsal23

Bioengineer
Oct 12, 2001
2
I somehow lost dialog boxes (AMextrude,mtext etc.). Entries are prompted on the command line. What variable or setting do I need to change to return to the dialog boxes?

Regards
 
Replies continue below

Recommended for you

This gets covered a lot on this forum.

Set CMDDIA = 1

Also check to see if FILEDIA = 1 while you're at it.
 
Type "CMDDIA" on your command line and set it's value to 1..

Also see if FILEDIA value is set to 1....

CMDDIA stands for Command Dialog Boxes... and
FILEDIA atands for FILE Dilog Boxes...

There are many other System variables you can paly with to ease your life while working with MDT or AutoCAD.... The list is available in HELP... just see in SYSTEM Variables..
n' Voila you've got what you wanted....

[peace]

Regards
Sumit....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor