Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Static analysis convergence issue

Status
Not open for further replies.
Killedhiphop

Killedhiphop

Mechanical
Apr 22, 2016
2
I am working on substructure analysis of pick up truck given in abaqus example problems manual 3.2.2.I am trying to run a static step but due to non linearity the solution is not converging. It is supposed to be a one increment step, but that is not the case when I run the simulation. Any help would be appreciated.

Thank you
 
Status
Not open for further replies.

Similar threads

IcarusAero223
  • Question
3D composite coupon convergence issue
Replies
5
Views
2K
FEA way
FEA way
E
  • Question
Convergence Error
Replies
1
Views
833
FEA way
FEA way
ruzfactor
  • Locked
  • Question
Convergence issue for a model with driver nodes
Replies
3
Views
280
FEA way
FEA way
AlanSYH_
  • Locked
  • Question
Mesh Convergence Test
Replies
6
Views
483
AlanSYH_
AlanSYH_
D
  • Question
Memory Allocation Issue
Replies
3
Views
3K
Daniel_LEE
D

Part and Inventory Search

Sponsor

Back
Top Bottom