Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stator Over Voltage Production

Status
Not open for further replies.

Jetmxmanager

Aerospace
Nov 7, 2007
1
Question:

What would cause a stator to overproduce output voltage? i.e. CMM requirements of 30-34 V RMS vs. Actuals of 35 volts RMS. This is being seen on units coming in from the field and I would think they would under produce after a lenghty time on wing.
 
Replies continue below

Recommended for you

There aren't a lot of "systems" guys to reply to your question. I don't have any bright ideas, either, and there isn't a lot of information to start with in your post. For a start, is there a field winding stimulating this generator? Is that working within limits? Also, where is the measurement taken? If you're measuring voltage and referring to VRMS, then are you on the AC side? What kind of airplane are we dealing with?

Steven Fahey, CET
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor