Does anyone know how to determine what is an acceptable level of piping vibration. We have a severe issue at certain loads with one of our main steam leads to a turbine, and are installing dampers in an attempt to solve. How do I know what is an 'acceptable' improvement?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Steam piping vibration 1
- Thread starter seanmc
- Start date
-
1
- #2
seanmc,
There seems to be no straightforward answer to this question....I have many years of power piping design experience...... and there is no "quick chart" that can be consulted about acceptable levels of vibration.
The best source of guidance is the ASME B31.1 Power piping code, and the text only states a general caution against "excessive" vibration.
I suggest that you post tis question under the eng-tips "Piping & Fluid mechanics Forum"..... also post at
Good luck !!!
MJC
There seems to be no straightforward answer to this question....I have many years of power piping design experience...... and there is no "quick chart" that can be consulted about acceptable levels of vibration.
The best source of guidance is the ASME B31.1 Power piping code, and the text only states a general caution against "excessive" vibration.
I suggest that you post tis question under the eng-tips "Piping & Fluid mechanics Forum"..... also post at
Good luck !!!
MJC
- Status
Similar threads
- Locked
- Question
