Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steel Brazing

Thread starter brazingman
Start date Jul 2, 2008

Status: Not open for further replies.

Jul 2, 2008

brazingman

Materials

I am looking for a steel which can be brazed with a piece of alumina at 850°C. This steel has to undergo thermic loads during brazing and must have good mechanical properties after brazing (young modulus and yield strength near those of alloys copper-nickel).

Thanks