steel/structural engineering 2

[Gebremeskel Gebrekorkos]

excellencies i am doing a research on estimation of prying action on t-stub joint. is there any body who could help me how can i know the amount of bolt force in t-stub joint on abaqus.

 

[SWComposites]

Please show a clear detailed picture of the joint and the loading. Then show a free body loads diagram for each joint member.

 

[Gebremeskel Gebrekorkos]

here are some FEM (abaqus) results for your information dear... thank you for your help.
[URL unfurl="true"]https://res.cloudinary.com/engineering-com/raw/upload/v1681996107/tips/bolt_zkjbqs.rar[/url]

 

[dvd]

AISC Steel Construction Manual has a treatise on prying. Find this book and use their recommendations. Maybe discuss on Structural forum.

 

[SWComposites]

sorry, I'm not going to download a zip file from an unknown source, and I don't have Abaqus available. Please post a free body diagram here in the forum.

 

[Gebremeskel Gebrekorkos]

I am not familiar with how to draw the FBD on this post. i have tried to draw with paint and copied but it is not displaying... i know I am troubling you but would you...

 

[PersonalProfile]

The following may be of interest, despite that you may be aware etc:

Prying in AISC

https://www.eng-tips.com/viewthread.cfm?qid=503100

 

[3DDave]

Click on the "Image" button and upload the image.

 

[dik]

Have you ever used the Windows 'Sanbbox' feature? I got hit with a ransomware virus a couple of months back, and have used it often, since then.

-----*****-----
So strange to see the singularity approaching while the entire planet is rapidly turning into a hellscape. -John Coates

-Dik

 

[Gebremeskel Gebrekorkos]

thanks every body for your generous help