Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stellite coating

Status
Not open for further replies.
afarboudi

afarboudi

Mechanical
Sep 22, 2015
14
0
0
NL
Hi
Does it possible to use stellite coated trims in Boiler feed water services which include amines and hydrazine ?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
This question should be addressed to the maker of Stellite materials. Not in this forum. Even then, the probability of getting and answer from the makers is very low. Just from my experience.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Ratheesh_n
  • Question
Stellite 6 over Alloy 625 weld overlay
Replies
1
Views
37
SPDL310
SPDL310
Material Engineer 98
  • Locked
  • Question
Stellite-6 requirement on Solid Inconel 825 Trim material
Replies
1
Views
21
Danlap
Danlap
3axap
  • Locked
  • Question
Nickel 55 and Nickel 60 - ball and seat coating for cryogenic
Replies
0
Views
1
3axap
3axap
trentar
  • Locked
  • Question
phosphate conversion coating for the cast valve bodies
Replies
6
Views
7
Nick_Gray_88
Nick_Gray_88
Iranna Shettar
  • Locked
  • Question
Tungsten carbide coating for Ball & Seat
Replies
1
Views
2
mk3223
mk3223
Back
Top