Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stepper Motor Size Selection

Status
Not open for further replies.
Y

YoungSnapple

Electrical
Nov 4, 2024
1
Hello I'm trying to size a stepper motor. I will be moving a 143 lb. 20 foot long PVC pipe which is situated on idle bearings. My motor is going to have a rubber wheel for contact with the pipe. With this setup I'm unsure how to size the motor properly.
 
Status
Not open for further replies.

Similar threads

Kash2013
  • Question
motor rotor material
Replies
6
Views
3K
panter
panter
K
  • Locked
  • Question
Motor Analysis
Replies
4
Views
1K
LionelHutz
LionelHutz
rockybhai
  • Locked
  • Question
Increase RPM of NEMA34 86HS9860A4 1.8 degree 6amp stepper motor
Replies
0
Views
167
rockybhai
rockybhai
freetown
  • Question
induced voltage synchronous motor
Replies
11
Views
5K
waross
waross
Emad Shaaban
  • Question
Electrical motor with rotor issue 1
Replies
12
Views
5K
Emad Shaaban
Emad Shaaban

Part and Inventory Search

Sponsor

Back
Top Bottom