Stormwater Injection Well Modeling

[ksmcclung]

I need help with how to model a stormwater injection well in Hydraflow-Hydrographs. I have a proposed detention pond which will have 3 riser structures, each over a 6" diameter injection well. Not sure how to model the outflows to similate the 3- 6" diameter injection wells. I will also have orifices in the risers to detain the first flush requirements.

Thanks,

Kristen

 

[beej67]

Hydraflow couldn't do that back in the 90s. Not sure if it can now or not.

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -

http://www.campbellcivil.com