I am designing a stormwater injection well in South Fla. The stormwater runoff flows by gravity into the well. The depth of the well casing is about 70 feet below ground surface elevation and the open hole extends about twenty feet from the well casing. The groundwater level is about 4 feet below the ground surface. The well is along the coast and therefore the groundwater has high TDS (aout 30,000 ppm). How would you compensate for the density difference of the injected, and basically fresh, stormwater as compared to the denser groundwater? Thanks for the help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stormwater Injection Well
- Thread starter djcbgn
- Start date
Similar threads
- Locked
- Question
- Locked
- Question