Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Strengthening of Slabs/Beams with Epoxy Plates

Status
Not open for further replies.

timh

Structural
Jan 1, 2000
16
AU
Does anyone know of any good sources of tech info into the strengthening of concrete slabs/beams through the use of epoxy bonded steel plates to the exterior surfaces. Are there any Standards in either the US or UK that describe this kind of strengtheing.<br>
<br>

 
Replies continue below

Recommended for you

Depending on the loading of the slabs/beams the strength will be determined by the strength of the epoxy. you are interested in the bending strength increase. That will be determeined by the shear strength of the joint over the entire section. I believe the proper term is the slip plane.<br>I dont' have any idea of there are standards. Hope this helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top