stress wizard issues

[Lars1978]

Hi All,

Can anybody help me with the questions beneath:
1. Where can I change te lay-out of the stress wizard report?
2. Can I set the output of the pics to a better quality?
3. When in the report step the 'back' button in the screen does nog react?
4. I someone really using this outdated wizard?


Lars




Lars
NX11.0.1.11 native
Solid Edge
Inventor

 

[SDETERS]

Edit these files for different results. Sorry all I got from trying to use a month or so ago.
Stress Wizard templates
•Stress — spsd_stress.xml
•Displacement — spsd_deform.xml
•Safety Factor — spsd_performance.xml
Vibration Wizard templates
•spsd_modal1.xml
•spsd_modal2.xml
•spsd_modal3.xml
•spsd_modal4.xml
•spsd_modal5.xml

 

[Lars1978]

Ok thnx. I'll give it a try.

Btw is it possible to adjust the force in the wizard after a calculation?


Lars
NX11.0.1.11 native
Solid Edge
Inventor

 

[SDETERS]

I do not know sorry.. We use the wizard to check the design before sending it to the FEA People. We Use it to try to reduce the number of iterations between the designers and the FEA people by getting the stresses out of the part before we send it to the FEA people.