Most of my structural engineering experience has been with extruded aluminum shapes where the Aluminum Design Manual is the standard code for structural design in the US. Does anyone know what publication is used for structural analysis of extruded polymer shapes used in building construction in the US?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Structural analysis of extruded polymer shapes 1
- Thread starter cvshep
- Start date
Compositepro
Chemical
Because polymers creep, unreinforced polymers are generally not considered structural materials. The kind of information you seek would in the product data sheet for each grade of polymer.
-
1
- #3
You might be thinking of GRP pultrusions,here is some data (although from a UK company):pultrusions
www.tynevalleyplastics.co.uk
It's ok to soar like an eagle, but weasels don't get sucked into jet engines.
www.tynevalleyplastics.co.uk
It's ok to soar like an eagle, but weasels don't get sucked into jet engines.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- News
- Locked
- Question