Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Structural retrofitting

Status
Not open for further replies.

EYFS

Structural
Jul 25, 2014
25
LB
Hi all,
I have an old building rehabilitation. can anyone suggest a book od a reference regarding retrofitting structural design..column concrete jacket, beams and others.
I already have retrofitting design; f building structures but it's based om Chinese code..I need a similar reference based on the American codes.
 
Replies continue below

Recommended for you

You need to determine member sizes and draw up an existing framing plan if existing drawings are not available. You have to assess your loading condition including lateral and see if it's comparable. You also have to check with your codes or authorities having jurisdiction to see what loading is prescribed and if portions of the structure can be 'grandfathered'. You should also sit down and discuss this with a local structural guy.

...and that's just the beginning.

Dik
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top