Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stud Spacing & Story Height

Status
Not open for further replies.

Ambemily

Structural
Jul 2, 2018
20
Is there a requirement for maximum stud spacing for certain number of building stories in the IBC? I thought i've seen this before, but can't seem to find it now. This is being brought up because my builder wants to increase the pony walls to 6ft tall, which should trigger the building as now having another story.
 
Replies continue below

Recommended for you

Never seen that but it may exist. I would do the math using the NDS equations based on the actual gravity and wind-loading.
 
I think the 24” max spacing could stem from the ability of GSB and plywood to function without buckling. Never seen ply on walls rated for more than 24”.

Mike McCann, PE, SE (WA, HI)


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor