Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sub-assemblies from other models

Status
Not open for further replies.
3JC

3JC

Mechanical
Jul 12, 2010
98
Dear collages:

I'm involved in this moment in a parametric study. But I want to know if it would be possible to import a model into a new model (what I want to do is to import different geometries of bolts). Thank you very much. Best regards,

jJ
 
Status
Not open for further replies.

Similar threads

omega_heiki
  • Question
Submodeling from pie-slice with symmetric BC
Replies
4
Views
1K
omega_heiki
omega_heiki
DualXeonSpaceHeater
  • Locked
  • Helpful tip
Resolving "SECTION CONTROL NAMES MUST BE UNIQUE" error when transferring b/w Abaqus models
Replies
0
Views
514
DualXeonSpaceHeater
DualXeonSpaceHeater
D
  • Question
Finding equivalent pushing force from applied displacement
Replies
2
Views
1K
SWComposites
SWComposites
Sakthiiitm
  • Locked
  • Question
Regarding taking resisting torsional moment of the beam from FE results
Replies
1
Views
165
FEA way
FEA way
Bruno V
  • Locked
  • Question
Output from DLOAD subroutine
Replies
5
Views
136
Bruno V
Bruno V

Part and Inventory Search

Sponsor

Back
Top Bottom