Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

submerged pump got tucked in the well 1

Status
Not open for further replies.

ajun1990

Mechanical
Jul 10, 2014
1
I have installed the submerge pump the ground well .once it cross 100ft bore well pipe size reduce to 3inch and gape between submerged pump and bore well just 0.5 inch difference due to rock chips it got stucked in between , we tried chain pulley by ropes due strong stuck in between even rope and wire got cut . the only option I have is pipe which is connected pump so kindly say your suggestion to get back the pump.
 
Replies continue below

Recommended for you

You will have to withdraw the well casing, if that is possible --- if not possible, call it experience and drill another well, use a larger diameter well casing and keep any rock chips and other rubbish out of the well.

It is a capital mistake to theorise before one has data. Insensibly one begins to twist facts to suit theories, instead of theories to suit facts. (Sherlock Holmes - A Scandal in Bohemia.)
 
Contract with a professional well driller. They have specialized tools and experience for these situations.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor