Suitable GC for Hydrocarbons

[oswald88]

Dear All
I am looking to procure a GC for hydrocarbons from C1 to C8. Suggest a suitable and best ones.

Oswald Vincent M.S Mech. Engg.

Keep Things Simple.

 

[georgeverghese]

While I dont have suitable manufacturers to recommend, pls also note that for a GC to work well, I'd say 80% of the required engineering work is in the gas sampling and preconditioning kit, and 20% is in the vendor supplied GC. If not all, most GCs' dont work because gas preconditioning is not adequate.