Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Supercritical Hydrogen 1

Status
Not open for further replies.

arimans76

Mechanical
Joined
Jul 25, 2006
Messages
6
Location
DE
Hi Folks,
I have to heat up (from 20 °C to 600°C) a mix of Methane and Hydrogen under a pressure of 200 bar. I need the hydrogen´s thermophisical properties under those conditions. Does someone know some internet site or handbook where I can retrieve these properties?

THX
 
Perry, Chemical Engineering Manual. I have the sixth edition. It has table 3-248b with properties (specific volume, enthalpy and entropy) up to 1000 K and 1000 bar.

shows more thermophysical properties, but goes up to 126.9oC and 1210 bar
 
Does the Perry contain also the coefficient of thermal conductivity and the cinematic viscosity (or dynamic viscosity and density)?
 

Thanks for the undeserved star.
The answer on Perry is regretfully no.
J.P. Holman's Heat Transfer (McGraw-Hill) Table A-6, shows these properties at atmospheric pressure up to 900 K.

Please note the expected changes due to pressure are small.

From the NIST site I got that at 125oC the "additions" when going from 1 bar to 200 bar are: for specific heat, 1.5%; for absolute viscosity 3.4%, and for thermal conductivity, 5.4%. Which tells us that the Pr number practically doesn't change with pressure.

Sorry, that's all I could gather on hydrogen from my sources.
 
The link that 25362 provided gives you all you need.

Cheers,
Joerd

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top