Hi all, I am in search of a supplier for a low cost ratchet mechanism containing a ratchet wheel/gear and pawl. It is for a light load application, and can be manufactured from any metal, but I imagine getting my hands on a cheap steel or brass one would be easiest. The ratchet solution would ideally be under $30. I greatly appreciate any help you can provide in finding a supplier or manufacturer.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Supplier for Inexpensive Ratchet Wheel and Pawl
- Thread starter dreinsdo
- Start date
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question