Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Supplier of continuous 220m lenght of hose

Status
Not open for further replies.

garyca

Industrial
Oct 25, 2004
4
Does anyone know where I could buy a continuous 220m length of industrial grade hose. The hose will supply water at a pressure of 5 to 20 bar at a flow rate of around 1-2 litres per second and be around 25mm diameter. It is for a mine and will be wound on a winch drum and will be required to support it's own (+water) weight when it is unrolled 200 metres down a verticle shaft.

Thanks
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor