Feb 1, 2011 #1 berri2 Mechanical Apr 6, 2010 139 Hi, I want to know how can I pass surfaces to solid in NX. Thanks
Feb 1, 2011 #2 MickyV007 Mechanical Jan 14, 2009 622 Sew them together (insert - combine bodies) or patch. But keep in mind that you need perfectly fitting sheets, you can however play with the tolerances. Or make use of the heal geometry function. Best regards, Michaël. NX4+TC9 / NX6+TC8Unified / NX7.5 native Upvote 0 Downvote
Sew them together (insert - combine bodies) or patch. But keep in mind that you need perfectly fitting sheets, you can however play with the tolerances. Or make use of the heal geometry function. Best regards, Michaël. NX4+TC9 / NX6+TC8Unified / NX7.5 native
Feb 1, 2011 #3 jerry1423 Mechanical Aug 19, 2005 3,428 Insert > combine bodies > sew You may, or may not, be able to sew them all together at the same time. Upvote 0 Downvote
Insert > combine bodies > sew You may, or may not, be able to sew them all together at the same time.
