Suspension Bridge Design Examples

[Struct123ure]

Looking to expand my knowledge, I have never designed bridges and am looking to learn. I am interested in the design and sizing of the cables that support the bridge.
Does anyone have textbooks, manuals, or resources with design examples for suspension bridges?

I have looked at the following:
Structural Steel Designer's Handbook 5ed - R Brockenbrough ->Good read, but not a single example was really looking for an example application of Table 15.6.
Cable Structures by Max Irvine(1981) -> More complicated then the above; still no examples.
Structural Analysis by R.C. Hibbeler -> Too basic, ignores cable elongation due to load, no mention of pre-tensioning.

 

[CSIESPL INDIA]

If you’re interested in learning about the design of suspension bridges, particularly focusing on the cables that support them, there are several authoritative textbooks, manuals, and online resources that can provide you with comprehensive knowledge and practical examples.

1. Bridge Engineering” by David F. Merritt This textbook provides a comprehensive overview of bridge engineering principles, including detailed sections on suspension bridges
2. Design of Cable-Stayed Bridges” by J. A. H. van der Meer While primarily focused on cable-stayed bridges, this book offers valuable insights into cable design principles that are also applicable to suspension bridges.
3. Structural Analysis” by Russell C. Hibbeler This widely used textbook covers fundamental concepts in structural analysis that are crucial for bridge design
4. FHWA Bridge Design Manual The Federal Highway Administration (FHWA) provides a comprehensive bridge design manual that includes specific sections dedicated to suspension bridges.
5. National Park Service: “Suspension Bridge Design” The National Park Service offers an educational resource that explains the basic principles behind suspension bridge design.