Sep 10, 2004 #1 Boosie Mechanical Joined Jul 25, 2003 Messages 17 Location US Is it possible to have configuration specific materials in SW04? I would like to edit the material seperatly for different configurations. For instance have one config set as Grey Iron and another as wood such as with a casting and a pattern.
Is it possible to have configuration specific materials in SW04? I would like to edit the material seperatly for different configurations. For instance have one config set as Grey Iron and another as wood such as with a casting and a pattern.
Sep 10, 2004 #2 SBaugh Mechanical Joined Mar 6, 2001 Messages 6,691 Location US You can't control Materials per config. You can however control Textures per config, not that that will help you much. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com If you are in the SW Forum Check out the FAQ section To make the Best of Eng-Tips Forums FAQ731-376 Upvote 0 Downvote
You can't control Materials per config. You can however control Textures per config, not that that will help you much. Regards, Scott Baugh, CSWP http://www.3dvisiontech.comhttp://www.scottjbaugh.com If you are in the SW Forum Check out the FAQ section To make the Best of Eng-Tips Forums FAQ731-376
Sep 10, 2004 #3 rockguy Mechanical Joined Oct 1, 2002 Messages 928 Location US SW 2005 does allow configuration specific materials! Yaaah. Upvote 0 Downvote
Sep 10, 2004 Thread starter #4 Boosie Mechanical Joined Jul 25, 2003 Messages 17 Location US THanks, I was hoping that I was just overlooking something. 05 sounds sweet so far. Hopefully we can get running it before too long. Upvote 0 Downvote
THanks, I was hoping that I was just overlooking something. 05 sounds sweet so far. Hopefully we can get running it before too long.