Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SW2008 Stability

Status
Not open for further replies.

dklarz

Mechanical
Mar 31, 2005
89
I am encountering a tremendous amount of stability problems with SW2008 and surface, sweeps and lofts. I've been running into 4-5 crashes and a couple of lock-ups per day. I've upgraded to 3.1 some time ago but doesn't seem to help.

I have the minimum or better recommended hardware. I've moved from the network to my local machine but that didn't seem to help either. Very frustrating! Anybody else see these kinds of issues??? Any ideas on a remedy?

Thanks - Dadelar
 
Replies continue below

Recommended for you

I think SW '08 has been the most stable release yet. I haven't had any of the lockups that I had in previous versions. I did have an issue with crashing when MS Explorer was open due to the thumbnails in explorer, though. However, since I fixed that issue, she's been pretty stable.

Dan

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor