Leo Marrero
Petroleum
Can I know some reasons why injections wells no longer have vacuum?
Thank you in advance for your help.
Leo Marrero
Thank you in advance for your help.
Leo Marrero
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
SWD Injection wells
- Thread starter Leo Marrero
- Start date
- Status
Not much information there.
Have you recently increased flow rate?
Has the source of, or the water quality changed recently?
Is there more solid content in the source water?
The fluid level may be high,
Reservoir permeability has changed.
Try reducing the injection flow rate.
A black swan to a turkey is a white swan to the butcher ... and to Boeing.
Have you recently increased flow rate?
Has the source of, or the water quality changed recently?
Is there more solid content in the source water?
The fluid level may be high,
Reservoir permeability has changed.
Try reducing the injection flow rate.
A black swan to a turkey is a white swan to the butcher ... and to Boeing.
LittleInch
Petroleum
Maybe the reservoir pressure has increased after all that injection of water?
Or you've clogged up the pores by injecting dirty water like Mr 44 says.
Who knows? We don't.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Or you've clogged up the pores by injecting dirty water like Mr 44 says.
Who knows? We don't.
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question