Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Synchro Coding Error

Status
Not open for further replies.

pothick92

Civil/Environmental
Aug 27, 2015
1
I am working on a Synchro file to evaluate the future conditions and using the following signal timing defaults based on NCDOT congestion management guidelines:

Yellow Time: 5 sec
All Red: 2 sec
Lost Time Adjusts: -2.0 sec

Vehicle Extension and Min Gap: 3.0 sec

When I am checking for coding error (Options>Coding Error Check) I am receiving the following error message "Total Lost Time is less than 3 seconds"

This error message is for right turn movements only (both shared through/right and dedicated right turn lane)

Can some one please help me identify the reason for this error?

Thanks in advance for your help.

Golam
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor