Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Synthetic Polyisoprene Aging Temp ???

Status
Not open for further replies.

cbaxter

Mechanical
Dec 9, 2004
1
US
I am working on a product that uses synthetic polyisoprene as a seal between two PVC housings. The synthetic polyisoprene is .25" x .25" cylinder. In the assembled condtion the polyisoprene is compressed between .008" and .010". I am running in to a problem with accelerated aging.
So far I have tested it at 50C, 55C, and 60C for 1-year equivalent aging. Humidity is not controlled in our ovens. After aging I have noticed that the polyisoprene takes a compression set which is creating a leak.

Does anyone know of the recommended aging temperature for synthetic polyisoprene?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top