Syntron Feeder Rehab

[vanskat]

I am trying to rehab a 10 yr old limestone milling plant that uses a Syntron Feeder. The most I can get off the nameplate is F-330-C-DT. From the busted up controls, it seems that it is operated at 230VAC etc..

Any advice on how to proceed in terms of sourcing literature, schematics etc.. I have tried FMC but no response..

 

[jbartos]

Suggestion: Visit

http://www.jmindustrial.com/display.asp?idgroup=4369&category=817

http://equipment.wgint.com/san_roque/crushing/syntronfeeder_pic1.html

http://equipment.wgint.com/

http://www.levyindustrial.com/fmc/contactforms/contact.asp

etc. for more info