Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tacky Thermoplastic Urethane Supplier

Status
Not open for further replies.

jgomes267

Mechanical
Aug 26, 2012
1
US
Hi all,

I'm trying to source a tacky material to attach a consumer product to a flat surface. Specifically, I'm looking for something that would be reusable for a number of cycles but would still hold the product securely in place. The loads that the material would experience would probably be in the range of 3-5 lbs.

In my search so far I've landed on the idea of a tacky TPU. I've managed to find a number of other products that use this type of material, but I haven't been able to source the urethane itself. I'd be looking to purchase it in sheet form if possible. Do any of you have experience with this type of material or know of a vendor that I could get in touch with?

Thanks!
 
Replies continue below

Recommended for you

The main PU suppliers are Bayer Materials Science and BASF. BF Goodrich also did it but they changed names to I don't know what.

My first thought was Velcro.

Sicaflex or 3M might also be worth a shout.

Regards
Pat
See FAQ731-376 for tips on use of eng-tips by professional engineers &
for site rules
 
Are you speaking of adhesive tackiness or simply non-slip tackiness? There is a plastic anti-slip film that we use in the medical industry called "Dycem". A google search will give you plenty of hits. For an adhesive tackiness, I'd second Pat's comment on 3M, they make a huge array of double-faced tapes in every degree of stickiness imaginable.

There are also the putty style of temporary adhesives, whose makers I cannot recall at the moment.

It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
 
Blue Tac (Blutack)(spelling?)is the popular putty type here. Trade names may vary elsewhere.

Regards
Pat
See FAQ731-376 for tips on use of eng-tips by professional engineers &
for site rules
 
That's the one!

It is better to have enough ideas for some of them to be wrong, than to be always right by having no ideas at all.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top